There is a programming error in the calculations of "line purity". The error affects any targets with more than one line; the more lines the worse the error. The plots and tables for "line purity" from the online catalog should not be used until corrections have been made.
Set 1: L-edge group, unfiltered. Target Voltages (kV): 7.858 11.787 15.716 19.645 PEIS Source Model: table plot1 plot2 At Focal Plane: table plot1 plot2 ACIS, Backside-Illuminated: table plot1 plot2 ACIS, Frontside-Illuminated: table plot1 plot2 HRC, CsI MCP + UV shield: table plot1 plot2
Set 2: L-edge group, Sn filter. Target Voltages (kV): 7.858 11.787 15.716 19.645 Filter Thickness (micron): 0 3.17 6.34 12.7 19. 25.4 31.7 PEIS Source Model (filtered): table plot At Focal Plane: table plot line purity - table plot (La2) plot (La1) plot (Lb1) plot (Lb4) ACIS, Backside-Illuminated: table plot line purity - table plot (La2) plot (La1) plot (Lb1) plot (Lb4) ACIS, Frontside-Illuminated: table plot line purity - table plot (La2) plot (La1) plot (Lb1) plot (Lb4) HRC, CsI MCP + UV shield: table plot line purity - table plot (La2) plot (La1) plot (Lb1) plot (Lb4)
Editor: Dr. Douglas Swartz System Administrator: Mr. Bob Dean Privacy Policy and Important Notices Accessibility Statement |